How to Replace a Saab 9-3 Key
The Saab 9-3 is a fantastic car that has a lot of appeal for drivers. It has a powerful engine as well as excellent visibility. It also has an excellent safety rating.
It is important that you have two keys that work for your vehicle. It could be costly to replace a key in the event that you lose it.
How to replace the ignition Key on a Saab 9-3
You have to replace your car keys in case it isn't turning. This guide will show how to replace the ignition key on the Saab 9-3. You will have to replace the key, buy a new reprogrammable cell, and then purchase a new casing for your key-fob.
The most modern Saab models utilize a transponder instead of a traditional key to unlock the car and begin it. The issue with this is that the reprogrammable batteries in the key-fob eventually wears out and will not hold a charge for any longer. This is especially relevant if you continue to use the same key in the same lock.
A professional locksmith can replace the battery with ease. If you have the proper tools and patience, you can do it yourself. The first step is to remove the key-fob apart. This is done by inserting a flathead screwdriver into the slot located in the middle of the case. The plastic is brittle, and can easily be damaged.
After the case has been opened and the case is opened, you can make the new key by combining the lower portion of the key that was used previously with the transponder and banana on the new key. This will ensure that the new key is linked to the CIM properly, which could make a big difference when replacing the original key for your Saab 9-3.
How do you replace the ignition Key on the Saab 900
If you don't have two keys, you will need to remove the steering wheel and dashboard in order to access the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, it is possible to remove all the trim pieces and dashboard pieces that surround the steering wheel. Once the dash has been removed, you can put a screwdriver into the opening behind the ignition switch and remove it.
The ignition barrel is equipped with a key lock, which could prevent the vehicle from starting if it does not have a key. If your 900's ignition isn't working properly, check the key to determine whether it's in the lock or in the barrel of ignition. You should also rotate your keys and keep them clean to prevent being bent.
Saab cars differ from other cars in that they do not use traditional metal keys. Instead, the car is able to recognize electronic signals coming from the key fob via an specialized microchip inside.
If you have lost your only working key fob the dealer will charge the highest dollar for the replacement of your computer module (known as the CIM). We can reprogram the EEPROM on your current computer to make it accept new keys without having to replace it. You'll save 50% off the price charged by the dealer! This is the SAAB KEY PROGRAM. Find out more about it here!
How to replace the ignition Key on a Saab 9-5
The metal part of the classic Saab keys is simple to copy and doesn't present a major threat to theft of vehicles. The real protection comes from the electronic part in the key-fob, which is equipped with a chip which recognizes your car once it is inserted into the ignition switch.
Saab has relied on the technology of this anti-theft device for more than a decade. It's not as good as a physical lock on the door but it makes the theft of your car much more difficult. This is why every Saab owner should keep an extra key on hand.
The majority of new Saabs come with two keys at the factory, however you can buy more keys from an agent using a handheld computer, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 vehicles that have more modern, newer features that require an ignition key.
If you lose all keys, the dealer will replace your CIM or TWICE modules, and charge you a premium for it. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.
How to replace the ignition Key on a Saab XC90
If your SAAB 9-3 key fob begins experiencing issues turning the lock barrel It could be the time to replace it. It's a simple process and you don't have to visit a dealer. Instead you can do it yourself at home with some basic tools.
In the beginning, you'll need to prepare the new key. Before you begin, turn off the anti-theft system by placing blocks under your rear wheels and engaging your handbrake. Insert the key in the ignition and turn it to the "on" position. replacement saab key will activate the accessories but will not start the engine. Repeat this five times, and then keep the key on the "on" position.
You'll then need to purchase an additional case for your key fob. You can find these at any auto parts shop, and they're generally quite affordable. Depending on the model, you could even get them without any electronic components.
To open the case, gently push the screwdriver with a flathead into the slot in the middle. The case will split easily and, once you do, you'll have access to the internal electronics. To remove the electronics, use a small flathead screwdriver and attempt to pull them out in a gentle manner.